> DATA CENTERS > Servers > 
 
BNT 10Gb Ethernet Switch Module
 • 
 
BNT 10Gb Ethernet Switch Module
In today’s environment as data center space is constrained and IT budgets get smaller, clients are looking for ways to increase utilization of their hardware. Virtualization offers the perfect platform by allowing clients to implement multiple virtual machines per server. To meet client requirements, Bull Blade Series offers the right balance of compute and I/O by offering high-performance servers like HS22 and next-generation 10Gb networking from Blade Network Technology.
 
  • Works with existing 1Gb or 10Gb infrastructures
  • Can offer up to 8 virtual ports per adapter, when paired with the Emulex Virtual Fabric Adapter
  • Provides 10 external SFP+ based uplink ports and 14 10Gb ports to each blade
  • Offers easy management via the SmartConnect tool
  • Supported on Bull Blade Chassis - Enterprise and compatible with Open Fabric Manager
  •  
     
    Overview
     
    Characteristics
     
    Resources
     
    Ordering
     
    Certificates
     
    Warranty
     
     
     
      
    Port Attributes
  • Nb of Internal Ports
  • 14 to the blade servers and 2 full-duplex 100 Mbps ports connected to the management module
  • Nb of External Ports
  • Up to ten 10 Gb SFP+ ports (also designed to support 1 Gb SFP if required, flexibility of mixing 1 Gb/10 Gb)
  • 10/100/1000 auto-negociation
  • auto-negotiating internal ports: 1 Gb or 10 Gb
      
    Supported Standards
  • 802.3 ad Link Aggregation (with LACP)
  • Yes
  • 802.1 Q (VLAN)
  • Yes
  • 802.1Qbg - Edge Virtual Bridging
  • Yes
  • 802.1s Spanning Tree/VLAN
  • Yes
  • 802.1x Port access control
  • Yes
  • 802.1w Rapid Spanning Tree
  • Yes
      
    Layer 3 Functions
  • IP Forwarding
  • Yes
  • Layer 3 Filtering
  • IP filtering with ACLs (up to 4096 ACLs supported)
  • Static Routes
  • Support for up to 128 static routes
  • RIP
  • Router Information Protocol (RIP) V1; RIP V2
  • BGP
  • BGP-4
  • OSPF
  • OSPF V1, V2, and V3
  • VRRP (L3 Support)
  • VRRP for router redundancy
      
    PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS
  • Size (HxWxD)
  • 0.79 in x 11.6 in x 10.3 in
  • Operating Constraints
  • º Temperature 50 to 125.6 F at an altitude of 0 to 3,000 ft and 50 to 120.2 F at an altitude of 0 to 10,000 ft
    º Relative Humidity 8% to 80%, noncondensing
  • Non-operating Constraints
  • º Temperature -40 to 149 F at an altitude of 0 to 39,370 ft
    º Relative Humidity 5% to 80%, noncondensing
      
    WARRANTY & SERVICES
  • Standard warranty
  • 3 years Day + 1 onsite
  • Warranty extension
  • optional, check local conditions
  • Other services (installation …)
  • optional installation, integration and implementation services
     
     
     
    Bull Blade Series
     
     Blade Chassis
    Enterprise
     Blade Servers
    Escala POWER
    novascale Xeon
     Network Fabric
    LAN Connectivity
     Cisco L2/L3 Ethernet switch 
     10Gb Ethernet Pass-Thru Module 
     BNT L2/L3 Ethernet switch 
     BNT 10Gb switch module 
     BNT L2/L7 Ethernet switch 
     Intelligent Copper Pass-Through 
     Server Connectivity Module 
     BNT 1/10Gb Uplink Ethernet switch 
    SAN Connectivity
     
    RELATED PRODUCTS
    • Rack Cabinets
    Rack'n Roll
     NovaScale Rack Cabinets
     Accessories
    • Storage
    Disk Storage
     StoreWay Optima
     StoreWay Optima SW
    Top of Page 
     © 2014 Bull SAS. All Rights reserved.