| |  | Cisco Nexus 4001I Switch Module |
|
| | • Lower Total Cost of Operation, High Performance, Enhanced Server Virtualization, and Increased Resilience | | |
|
| | The Cisco Nexus™ 4001I Switch Module for Bull Blade Series is a blade switch solution for Bull Blade Chassis - Enterprise, providing the server I/O solution required for high-performance, scale-out, virtualized and nonvirtualized x86 computing architectures. It is a line-rate, extremely low-latency, nonblocking, Layer 2, 10 Gigabit Ethernet blade switch that is fully compliant with the INCITS Fibre Channel over Ethernet (FCoE) and IEEE 802.1 Data Center Bridging (DCB) standards. |
| |
| End-to-end 10Gb switch offers a high-performance, low-latency solution that seamlessly integrates with other Cisco® Nexus family products. |
| Optional upgrade license key enables easy transition to FCoE. |
| 20 ports of 10Gb (14 internal and 6 external) bandwidth. |
| Supported on Bull Blade Châssis - Enterprise and compatible with Open Fabric Manager. |
| Common Nexus CLI and web based management tool. |
|
| |
| | | | | | | |
| Port Attributes |
| Nb of Internal Ports |
Fourteen internal auto-negotiating ports: 1 Gb or 10 Gb to the blade servers |
| Nb of External Ports |
Six 10 Gb SFP+ ports operating at wire speed. Also designed to support 1 Gb SFP if required.
One 10/100/1000 Mb copper RJ-45 used for management or data. |
| 10/100/1000 auto-negociation |
Yes |
| External Serial Port |
An RS-232 RJ-45 connector for serial port that provides an additional means to configure the switch module. The console cable is supplied with the switch module. |
| | |
| Supported Standards |
| 802.3 ad Link Aggregation (with LACP) |
EtherChannels and LACP (IEEE 802.3ad) link aggregation, up to 60 Gb of total uplink bandwidth. |
| 802.1 P (Priority Queues) |
Yes |
| 802.1 Q (VLAN) |
Yes |
| 802.1d Spanning Tree |
Yes |
| 802.1s Spanning Tree/VLAN |
Yes |
| 802.1x Port access control |
Yes |
| 802.1w Rapid Spanning Tree |
Yes |
| | |
| PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS |
| Size (HxWxD) |
4.4 X 1.2 X 10.2 in |
| Weight (Kg) |
about 2.3 lb |
| Operating Constraints | | º Temperature |
5°C to 40°C at an altitude of 0 to 3,048 m |
| º Relative Humidity |
8% to 80%, noncondensing |
| Non-operating Constraints | | º Temperature |
–40°C to 65°C at an altitude of 0 to 15,240 m |
| º Relative Humidity |
5% to 80%, noncondensing |
| | |
| POWER REQUIREMENTS |
| Voltage |
12 V DC |
| | |
| WARRANTY & SERVICES |
| Standard warranty |
3 years Day + 1 onsite |
| Warranty extension |
optional, check local conditions |
| Other services (installation …) |
optional installation, integration and implementation services |
| |
|
| | | | | | • Rack Cabinets | | Rack'n Roll |  | | | | • Storage | | Disk Storage | | | | | |
|
|
I 
International [
