| | |
| Fibre Channel Standards |
| Standards Compliance |
FC-GS-4 ANSI INCITS 387, FC-SW-3 INCITS 384, FC-VI INCITS 357, FC-TAPE INCITS TR-24, FC-DA INCITS TR-36, FC-PI INCITS 352, FC-PI-2 INCITS 404, FC-FS INCITS 373, FC-BB-2 INCITS 372, FC-SB-3 INCITS 374,IPFC RFC 2625, Fabric Element MIB RFC 2837, MIB-FA INCITS TR-32, FCP-2 INCITS 350, ANSI INCITS 388 |
| | |
| Switch specifications |
| Nb of Fibre channel port |
20-ports switch 14 internal ports to blade servers 6 external 8/4/2Gb auto-sensing ports. |
| External port type |
Configured as Fabric port (F_port), Expansion port (E_port), 1Gb, 2Gb or 4Gb auto-detect SFP ports. |
| Internal port type |
Configured as Fabric port (F_port), speed auto-negotiation or 4 Gbps. |
| Classes of service |
Class 2 and Class 3 Fibre Channel services |
| Buffer credits |
288 credits shared across 20 ports,140 max credits per port |
| Media type |
SFP module LC connector, Short-Wavelength Laser (SWL), Long-Wavelength Laser (LWL) |
| Fabric Port Speed |
2, 4 or 8 Gbps line speed, full duplex. |
| Maximum Frame Size |
2112-byte payload |
| Scalability |
239 switches maximum depending on the SAN configuration |
| Fabric Latency |
1.2 μsec with no contention, cut-through routing at 8 Gbit/s |
| Fabric Point to point bandwith |
4 Gbps or 8 Gbps at full duplex |
| Fabric Aggregate bandwith |
160 Gbit/sec |
| Non-blocking Architecture |
includes simultaneous wire speed support for all ports |
| Fabrics Services |
Standard: Advanced Zoning (standard), optional: ISL Trunking, Advanced Performance Monitoring, Fabric Watch , Extended Fabrics, Advanced Secure Operating System |
| | |
| Switch Maintenability |
| Diagnosis |
Power-on self test (POST) is performed on all components Port operational tests include internal, external, and online tests |
| Light Diagnostics |
yes |
| | |
| Fabric Management |
| Management Methods |
Web interface via Advanced Web Tools, Command-line interface (CLI) through Telnet or NovaScale Master, Application program interface (API), Management information base (MIB) for integration with NovaScale Master |
| SNMP Agent |
Enables NovaScale Master management workstation to receive configuration values, traffic information, and Fibre Channel failure data through SNMP |
| | |
| SFP Module |
| Shortwave Laser Multi-mode |
supported |
| º Speed Compliance |
8, 4, 2 Gbps |
| º Connector |
LC-LC Fibre Channel cable |
| º Color coding |
Beige or black exposed connector surfaces |
| Longwave Laser Multi-mode |
supported |
| º Speed Compliance |
8Gbps |
| º Connector |
LC-LC Fibre Channel cable |
| º Color coding |
Blue exposed connector surfaces |
| | |
| PHYSICAL AND ENVIRONMENTAL SPECIFICATIONS |
| Size (HxWxD) |
29 mm (1.14 in.) X 112 mm (4.41 in.) X 260.3 mm (10.25 in.) |
| Weight (Kg) |
about 1Kg |
| Operating Constraints |
| º Temperature |
5°C to 40°C at an altitude of 0 to 3,048 m |
| º Relative Humidity |
8% to 80%, noncondensing |
| Non-operating Constraints |
| º Temperature |
–40°C to 65°C at an altitude of 0 to 15,240 m |
| º Relative Humidity |
5% to 80%, noncondensing |
| | |
| REGULATORY & SAFETY |
| Safety |
Low Voltage Directive, 73/23/EEC, TUV Bauart Approved to EN60950:2000, CB Report to IEC 60950 3rd Edition with all International Deviations, UL 60950–1, First Edition |
| Emissions |
EN55022:1998 +A1:2000 + A2:2003, Class A, ITE Specific Radiated and Conducted Emissions, EN55024: ITE Specific Immunity, FCC Part 15, Class A |
| | |
| WARRANTY & SERVICES |
| Standard warranty |
3 years Day +1 onsite |
| Warranty extension |
optional, check local conditions |
| Other services (installation …) |
consulting -, project -,installation - and support services 2.0. |
| |
I 
International [
