| | |
| TECHNICAL HIGHLIGHTS |
| Form Factor |
Standard NEMA 19-inch rackmount;
2U Storage Processor Enclosure including Standby Power Supplies (SPS);
3U 15-slot Disk Array Enclosure |
| Storage Processor |
Dual active/active, Asymmetric Logical Unit Access (ALUA) |
| Host Connectivity |
CX3-20C: 4 x 4Gb/s FC + 8 x 1 Gbit/s Ethernet; CX3-20F: 12 x 4Gb/s FC |
| Cache Memory |
2GB per storage processor |
| Supported Protocols |
| º SAN |
Fibre Channel Protocol (FCP); iSCSI (CX3-20C only) |
| LUNs |
1024 Max. |
| Max. Hosts |
128 HA hosts |
| Min/Max. Disk Drives |
5 up to 120 |
| Max. Capacity (raw/formatted) |
More than 210 TB * |
| Drives Supported |
| º SATA II 5400rpm |
1 TB** and 2 TB** 4Gb/s |
| º SATA II 7200rpm |
1 TB** and 2 TB 4Gb/s |
| º Fibre Channel 10Krpm |
146 GB** 2Gb/s; 300, 400**, 450 and 600 GB 4Gb/s |
| º Fibre Channel 15Krpm |
73**, 146**, 300, 450 and 600 GB 4Gb/s |
| RAID Support |
RAID 0, 1, 1/0, 3, 5, 6 |
| Back-end Connectivity |
2 x 4Gb/s FC (1 dual loop) |
| Reliability |
Redundant, hot-swappable controllers, drives, power, cooling |
| Availability |
multi-path access |
| |
mirrored cache, disk vault protected |
| |
preventive disk monitoring |
| |
on-line upgrade |
| |
global and proactive hot-spare disks |
| |
battery backup unit |
| | |
| HOST ENVIRONMENT |
| FC Host Support |
Windows, Solaris, Linux, AIX, HP-UX, GCOS 7 (hosted on Windows), VMware *** |
| iSCSI Host Support |
Windows, Solaris, Linux, VMware, AIX *** |
| | |
| MANAGEMENT & ADMINISTRATION |
| Storage Management |
Navisphere ® Manager, Navisphere Quality of Service Manager |
| Multi-path Management |
PowerPath ® for physical and virtual environments |
| Snap Shot |
SnapView™ |
| Performance Monitoring |
Navisphere Analyzer |
| Local Data Replication |
SnapView™ |
| Remote Data Replication |
MirrorView™, SAN Copy™ |
| Other |
ControlCenter 6.1 option |
| | |
| PHYSICAL SPECIFICATIONS |
| Dimensions (HxWxD) |
| º Storage Processor Enclosure |
3.29 in. (8.36 cm) 2 EIA units x 18.92 in. (48.06 cm) x 31.58 in (80.21 cm) including SPS |
| º Disk Array Enclosure |
5.25 in. (13.33 cm) 3 EIA units x 17.72 in. (45.0 cm) x 14.00 in. (35.56 cm) |
| Weight |
| º Storage Processor Enclosure |
90 lb (41.0 kg) max. including SPS |
| º Disk Array Enclosure |
68 lb (30.9 kg) max. |
| | |
| ENVIRONMENT |
| Temperature |
50-104 degrees F (10-40 degrees C) |
| Humidity |
20% to 80 % (non-condensing) |
| Altitude |
8,000 ft. (2438.4 m) @ 104 degrees F (40 degrees C) max.; 10,000 ft. (3048 m) @ 98.6 degrees F (37 degrees C) max. |
| | |
| POWER |
| Input Voltage |
100-240 VAC ±10 %, single phase |
| Frequency |
47-63 Hz |
| Power consumption |
| º Storage Processor Enclosure |
240 VA (230 W) max. |
| º Disk Array Enclosure |
440 VA (425 W) max. |
| Heat Dissipation |
SPE: 785 BTU/hr; DAE: 1,450 BTU/hr |
| | |
| REGULATORY & SAFETY |
| Safety |
UL 60950, CSAC 22.2-60950, FN 60950, NEBS Level 3 Certification, ETSI EN 300 386; Manufactured under an ISO 9000-registered quality system |
| Electromagnetic Compatibility (EMC) |
FCC Class A, CE Mark, ICES-003 Class A (for Canada), EN55024 Immunity ITE, EN55022 Class A, VCCI Class A (for Japan), AS/NZS 3548 Class A (For Autralia, New Zealand), BSMI Class A (for Taiwan) |
| | |
| WARRANTY |
| Standard warranty |
World Wide; 3 years Hardware Support, 9x5 Next Business Day, onsite response |
| Extended Warranty |
4 hour, 7x24 onsite response (depending on location) |
| | |
| NOTES |
| Note 1 |
* The FLARE® storage operating environment requires 33 GB of disk space on each of the first five drives |
| Note 2 |
** These disk drives are no longer commercialised |
| Note 3 |
*** Consult EMC Interoperability Support Matrix |
| |
I 
International [
